City of Richmond Culvert Stabilization
Void fill, Soil Stabilization, Inflow and Infiltration Mitigation of over 1 mile of Culvert in Richmond, BC
Manhole Rehabilitation
Port of Seattle Stormwater Rehabilitation
Port of Seattle was experiencing severe settlement in its stormwater conveyance system.
Manhole Rehabilitation Polyurethanes
Using NCFI polyurethanes for manhole rehabilitation is a no-excavation, minimally invasive repair solution that gets manholes repaired quickly and cost-effectively.
Terra-Lok 24-120 Single Component Polyurethane System
24-120 TERRA-LOK™ 24-120 is a low viscosity single component hydrophobic polyurethane used for increasing the load bearing capacity of loosely bound soils, filling voids and I/I mitigation Ideal for stopping active or flowing water leaks and eliminating water seepage through cracks in stationary concrete structures and assets. About The System 24-120 Physical Properties In Reaction …
Terra-Lok 24-120 Single Component Polyurethane System Read More »
Terrathane 24-035 Dual Component Polyurethane
24-035 Terrathane™ 24-035 is a two-component, water blown, MDI- based spray polyurethane-polyurea hybrid system designed for use as a high-strength backing material or primary surface material for stabilizing masonry surfaces. Terrathane™ 24-035 has been formulated to spray at 6 – 8 pcf based on lift thickness. About The System 24-035 AdvantagesTerrathane™ 24-035 Polyurethane/ Polyurea Hybrid …
Terrathane 24-042 Dual Component Polyurethane
24-042 TerraThane™ 24-042 is a 3.5lb water blown, MDI-based, hydrophobic / hydro-insensitive geotechnical polyurethane formulated for exceptional spread and lifting capacity. The hydrophobic nature of 24-042 allows it to maintain exceptional physical properties even in saturated conditions. About The System 24-042 Technical Specifications Terrathane™ 24-042 Density3.5 pcf Compressive Strength 60 psi Cream Time 6 – …
Terrathane 24-044 Dual Component Polyurethane
24-044 Terrathane™ 24-044 is a 3.0lb hydrophobic / hydroinsensitive, MDI-based, water blown system formulated for excellent expansion and pinpoint control for structural lifting and leveling. The 24-044’s hydrophobic nature allows it to maintain exceptional physical properties even in saturated conditions. About The System 24-044 Technical SpecificationsTerrathane™ 24-044 Density 3.0 pcf Compressive Strength 41 psi Cream …
Terrathane 24-003 Dual Component Polyurethane
The Terrathane 24-003 is a water blown system with exceptional spread and lifting capability. Hydrophobic and available with NSF/ANSI 61 Section 5 Certification