NCFI Terra-Lok™ 24-120 Used to Stabilize NJ Turnpike and Culvert
Culvert soil loss was resulting in the weakening of the roadway and causing it to settle. To repair the issue, ECRR treated the soils with NCFI’s Terra-Lok™ 24-120.
Trenchless Sewer Rehabilitation
Kentucky Water Treatment Center Walkway Collapse
Soil Subsidence and base soil loss led to sinkhole-like conditions and the collapse of a walkway at a Kentucky Water Treatment Center.
Stormwater Drain in Asheville, North Carolina
TerraThane 24-042 is used to backfill and stabilize a 14′ Stormwater Culvert in North Carolina
Port of Seattle Stormwater Rehabilitation
Port of Seattle was experiencing severe settlement in its stormwater conveyance system.
Reeds Creek Fish Hatchery Leakage Repair With Polyurethane
NCFI TERRATHANE™ 24-042 used to fill voids for reed creek fish hatchery leakage repair and soil subsidence stabilization. The pipes were experiencing leakage throughout the system that was causing soil washout and, subsequently, large voids underneath the raceway and settlement and cracking in isolated areas of the raceway that was leading to additional water loss.
Strata-Fill 24-039 Low Exotherm Polyurethane System
Strata-Fill™ 24-039 offers slow reactivity for greater flow, making it ideal for filling large void areas, pipe abandonment, and underground tank abandonment.
Terra-Lok 24-120 Single Component Polyurethane System
24-120 TERRA-LOK™ 24-120 is a low viscosity single component hydrophobic polyurethane used for increasing the load bearing capacity of loosely bound soils, filling voids and I/I mitigation Ideal for stopping active or flowing water leaks and eliminating water seepage through cracks in stationary concrete structures and assets. About The System 24-120 Physical Properties In Reaction …
Terra-Lok 24-120 Single Component Polyurethane System Read More »
Terrathane 24-035 Dual Component Polyurethane
24-035 Terrathane™ 24-035 is a two-component, water blown, MDI- based spray polyurethane-polyurea hybrid system designed for use as a high-strength backing material or primary surface material for stabilizing masonry surfaces. Terrathane™ 24-035 has been formulated to spray at 6 – 8 pcf based on lift thickness. About The System 24-035 AdvantagesTerrathane™ 24-035 Polyurethane/ Polyurea Hybrid …
Terrathane 24-042 Dual Component Polyurethane
24-042 TerraThane™ 24-042 is a 3.5lb water blown, MDI-based, hydrophobic / hydro-insensitive geotechnical polyurethane formulated for exceptional spread and lifting capacity. The hydrophobic nature of 24-042 allows it to maintain exceptional physical properties even in saturated conditions. About The System 24-042 Technical Specifications Terrathane™ 24-042 Density3.5 pcf Compressive Strength 60 psi Cream Time 6 – …
Terrathane 24-044 Dual Component Polyurethane
24-044 Terrathane™ 24-044 is a 3.0lb hydrophobic / hydroinsensitive, MDI-based, water blown system formulated for excellent expansion and pinpoint control for structural lifting and leveling. The 24-044’s hydrophobic nature allows it to maintain exceptional physical properties even in saturated conditions. About The System 24-044 Technical SpecificationsTerrathane™ 24-044 Density 3.0 pcf Compressive Strength 41 psi Cream …